30
31
The controller will wait to set what of the two temperatures should
be held (day or night). Press the key or use the knob to change
the setting. Press the key to acknowledge the selection.
Option 2
If, for some reasons, you would like to suspend program execution,
for example because of a longer party, and the controller has already
started to decrease temperature for the night setting (the symbol
is displayed), and you whish to keep comfortable temperature
till the party ends:
Press the , key, and the and symbol will be displayed. The
day temperature will be kept for as long as the next temperature
change is made by the program.
To switch this function off, press the key, then the symbol
will disappear.
Similarly, if you are leaving your house for a longer time, then:
Press the key, and the . The night temperature will
be kept for as long as the next temperature change is made by the
program
To switch this function off, press the key, then the
symbol will disappear.
sun>
OK..
<rę
<su <rę> <s>
OK.. <rę
<sun <rę> <ks
OK.
<rę>
and
If you leave for a longer time, you can set the anti-freeze
temperature. This will prevent from the consequences of freezing of
water in the heating system by automatic temperature setting to
7°C. To set the anti-freeze program, select the program 0 at the
desired day of week.
Anti-freeze temperature
Reset is done by removing the battery for as long as the data from
the display disappears.
Controller RESET
MASTER RESET is done by pressing and holding the key and
putting the battery in at the same time.
This will reset the controller to defaults.
<OK>
Controller MASTER RESET
NOTE: All user programs will be deleted!
To Next Page
Loading...
