NOTE:
Any modified program for a specific day can also be selected and implemented during
another day of the week.
Manual control
V
Option 1:
If, for some reason, you want to stop the current program at a given moment and extend the day or
night temperature, you can do it manually, but for not longer than 24 hours. To do this you should:
Hold the r button for 3 seconds. Then, using the knob, select the number of hours of manual
operation (24 hours at the most) and confirm the setting using the ( button.
AURATON Libra will wait until you choose one of the two temperatures which it should maintain (day
or night). The change is made by using the r button or the knob. Confirm the selection using the (
button.
Option 2:
If you want to suspend the execution of a given program, e.g. due to a party lasting longer than
expected, but AURATON Libra has already started lowering the temperature for the night (the T
symbol has appeared on the display), you should:
Press the r button, the display will show the symbols of a V and the S. The day temperature will then
be maintained until the next temperature change carried out by the program.
To withdraw the above-mentioned action press the ( button. The r symbol will disappear from the
display.
Similarly, if the program is using the day temperature but you want it to implement the night
temperature immediately, you should:
Press the r button. The display will show the symbols of a V and the T. The night temperature will
then be maintained until the next temperature change carried out by the program. To withdraw the
To Next Page
Loading...
