- 10 -
NAS Smart Copy
ACS Companion Mode
If you are using an ACS as a companion or in addition to another primary Aurender server, you
will want to "merge" the library contents so that your primary Aurender's music library is based on
content stored on the ACS plus its own local storage.
1. Go to the "ACS" section of the Conductor Settings Menu
2. Tap "Select ACS to connect"
3. Follow the on-screen prompts to connect to your ACS and merge your library.
If your music is stored on a NAS, you can use Smart Copy to copy contents from the NAS to the
Aurender internal storage.
1. Sign into your NAS by going to the NAS Server section of the Conductor Settings Menu. Tap
"Browse NAS Server" to find your NAS.
2. Select your NAS from the list of found servers, then enter the Username and Password to connect.
3. Follow the "USB Smart Copy" steps on page 9, except select "NAS" instead of "USB" in step 2.
To Next Page
Loading...
