- 6 -
ACS10 as Stand-Alone Server - LAN Connection
The ACS10 is equipped with isolated LAN ports for greater noise reduction. If using the ACS10 as a
stand-alone music server, plug the Ethernet cable into the "LAN 1 2X Isolated" port:
If you are using ACS10 as a companion to another Aurender server/player, refer to the diagram
below for optimal connection scheme which provides double isolation for the primary Aurender
server/player:
ACS10 as Companion Unit - LAN Connection
For best performance, do not stack ACS10 and other Aurender product directly on top of one
another. Separate them to different shelves for proper vibration isolation. You can even place them
in different rooms entirely if your home's Ethernet wiring allows.
In this ideal scenario (ACS10 + other Aurender server/player), the ACS10 acts as a filter to isolate your
primary Aurender player from any noise transferred over Ethernet.
To Next Page
Loading...
