1. ON/OFF/Standby
Pressing the illuminated power button will power the unit on and off. To power the A1000 on
from standby, press the button once, so the Aurender display shows "Aurender A1000". If the
A1000 is powered on, enter Standby mode by pressing the front panel button once, and the
unit will turn off with a display message that says "shutting down, please wait". If the Aurender
is powered on but the screen is off, you will hit the power button one time to wake the screen
up and one more time to enter standby mode. *In standby mode, the Aurender is not
reachable with the Conductor app. The power LED will flash during boot up and shut down.
The flashing will stop when the boot procedure completes.
2. LCD Display
3. Volume Knob
4. Input selection
Press the button to toggle input A1000 – BT – ARC – Coaxial – Optical - USB
5. IR Receive window
6. Output selection
Press the button to toggle output analog - digital
7. Display Menu button
Press to cycle through 3 display options: Song Information, Playlist and Aurender IP. Songs
from playlists may be selected using the four buttons on the right side of the front panel
display. Use buttons 8 and 10 to scroll between playlists and button 9 to select a playlist. After
To Next Page
Loading...