16 GB/IE
Note: If you would like to take out more than one consecutive
segment
6
, it is sufficient to remove the two outer pins.
Connect the watch strap together again by joining the loose
segments
6
with a pin. Press this pin against the direction of the
arrow into the adjacent segments
6
.
How to exchange the pin inside the slider
(Fig. D, E, F)
Take out the slider
8
, open the bottom cover
10
with the spare
pin
9
inside.
You will need pliers to carefully remove the old pin from the slider.
Insert the spare pin carefully into the slider by again using the
pliers. The new pin is installed.
Cleaning and maintenance
Clean the product on the outside only with a soft, dry cloth.
Disposal
The packaging is made entirely of recyclable materials,
which you may dispose of at local recycling facilities.
The Green Dot is not valid for Germany.
To Next Page
Loading...
