Need help?Do you have a question about the Aurora Design FMR-1 and is the answer not in the manual?
General| Category | Car Receiver |
|---|---|
| Model | FMR-1 |
| Manufacturer | Aurora Design |
| Power Output | 4 x 50W |
| Frequency Response | 20Hz - 20kHz |
| Input Sensitivity | 200mV |
Details the color-to-signal mapping for the 12-pin wiring harness used for vehicle connection.
Explains how to connect speakers, including impedance and power needs for optimal performance.
Technical details for the FM radio tuner, including frequency range and sensitivity.
Technical details for the AM radio tuner, including frequency range and sensitivity.
Details speaker impedance and maximum output power for the FMR-1 unit.
Covers input level, impedance, withstand voltage, output level, and frequency response.
Explains the front panel LED functions and how to select operating modes (AM, FM, Aux).
Instructions for using the tone control to adjust virtual balance and fader.
Describes how tone switches affect volume control and radio tuning operations.
Details optional Line Out jacks and other operational aspects.
Covers low power, no sound, reception problems, and power-on diagnostics.
Addresses engine noise reduction and LED indicators for overheating.
Explains how the optional BT-1 Bluetooth adapter interacts with the FMR-1.
To Next Page