Need help?Do you have a question about the Aurora VPX Series and is the answer not in the manual?
General| Brand | Aurora |
|---|---|
| Model | VPX Series |
| Category | Transmitter |
| Language | English |
Outlines essential safety guidelines for using the product, including electrical and ventilation advice.
States the device's compliance with FCC Rules and its operating conditions.
Acknowledges trademarks belong to their respective owners.
Lists items included in the VPX-TC1-PRO and VPX-TX1-WP2 box versions.
Details the VPX-TX1-WP2 wall plate version contents.
Overview of VPX-TC1 Pro Series and Mimix™ CODEC technology.
Lists available documents to support VPX series and accessories.
Details key capabilities and specifications of the VPX Series products.
Describes status indicators and OLED display functionality.
Explains the function of the Menu, Up, Down, and Enter buttons.
Details IR Window, IR Input, USB 2.0, and Camera ports.
Describes 48VDC, LAN, USB 2.0, Control IR Out, HDMI In/Out, Audio In/Out, RS-232, and SFP.
Details In 1/2 buttons and I/O ports.
Covers boot modes, reboot, and status light behavior.
Details 48VDC, LAN, RS-232, and Expansion Slot.
Unit-to-unit connection without an Ethernet switch.
Switch criteria for VPX operation, including IGMP and Jumbo packets.
Cabling and network setup requirements for optimal performance.
Network segmentation strategies for AV systems.
Setting up redundant control systems for enhanced reliability.
Importance and configuration of EDID for display compatibility.
Features for configuring up to 8x8 video walls with low latency.
Details bandwidth needs for USB devices during operation.
Bandwidth usage scenarios for video streams at different resolutions.
Data rates for various video resolutions and frame rates.
Steps for configuring the network switch and connections.
Guide for setting up an encoder unit, including power and input selection.
Guide for setting up a decoder unit, including power and input selection.
Establishing control communication using IPBaseT Manager.
How to route audio sources to Dante or HDMI in encoder mode.
How to route audio sources from Dante or HDMI in decoder mode.
Key points for optimal performance, including resolution and firmware.
Navigating the encoder web interface tabs and sections.
Accessing unit hardware, version, and statistics information.
Steps to select and upload new firmware to the unit.
Configuring IP address, Host ID, Host Name, and VLANs.
Configuring RS-232 communication via IP and baudrate settings.
Managing login credentials by changing username and password.
Setting encoder/decoder mode and auto-sensing for HDMI inputs.
Disabling front panel buttons for public access locations.
Choosing the input for the local display source.
Managing HDCP for video sources for compatibility or to turn it off.
Selecting and routing audio inputs from HDMI and analog sources.
Managing Dante audio sources and line level volume.
Saving and loading unit configuration for cloning or replacement.
Tools for finding units and enabling console access for debugging.
Viewing the active video source or 'No Signal' image.
Viewing unit status, MAC address, serial number, and firmware version.
Configuring decoder access to encoders using a CSV file.
Using bitmap files for the OSD display when there is no signal.
Controls the Picture in Picture function on the VPX.
Adjusting video wall bezel and gap settings for seamless display.
Configuring video wall dimensions and layout for the display grid.
Using EPG with decoder channel mapping for channel selection.
VPX-TX1-WP2 to VPX-TC1 Decoder connection.
VPX system for multi-room applications.
Multiple VPX to Multiple VPX matrix configuration.
Setting up 4K video walls with VPX Series.
Using USB 2.0 for KVM functionality and peripheral routing.
Connecting for local Ethernet control using SFP or RJ-45.
Daisy chaining VPX-TC1-PRO units via RJ-45 or fiber.
Dante/AES67 setup with a separate Ethernet switch.
Introduction to Aurora's IPBaseT Manager software for control.
Pin configuration for the Type A HDMI connector.
Ethernet cable wiring configurations for T568A and T568B.
Guidance on choosing appropriate RS-232 cables and connectors.
Details on IR receiver models and connection requirements.
Troubleshooting steps for web server unresponsiveness.
Resolving video output problems like no picture or incorrect colors.
Troubleshooting audio path and EDID issues.
Resolving RS-232 communication faults and baud rate issues.
Problems with source routing, display tearing, and synchronization.
Addressing poor server performance and firmware update failures.
Steps for updating the unit's firmware via web interface or manager.
Details on accessing and downloading the IPX protocol.
Guidance on Cat 5e, Cat 6, and Cat 6A cables and their specifications.
General guidelines for network switches, including IGMP and Layer 3 support.
Specific settings to check on switches like IGMP Snooping and FastLeave.
Power requirements for PoE/PoE+ switches and port capacity.
Detailed technical data including compression, latency, and I/O.
Detailed technical data including compression, latency, and I/O.
Explanation of warranty coverage, duration, and conditions.
Conditions that void the product warranty and liability limitations.
To Next Page