AUSTAR TECHNOLOGY (HANG ZHOU) CO., LTD.
is still too low for normal usage.
The adjustable volume level is from 0 to 15.
The recommended volume will be 12 to maintain the best performance. Setting the
volume to high may introduce excessive echo.
15. recharge
When AU500 detects that the battery is low, it will start to produce “do” sound to indicate this.
If the battery is too low the AU500 will display “battery low” on the screen informing you to
recharge it. AU500 will turn itself off when it detect the battery is extreme low. The battery
icon will also blink.
To recharge AU500, just plug the charger to power supply and connect with AU500. The
battery icon will keep blinking and a “charging” message will be displayed on the screen.
When AU500 detect the battery is full again, it will stop charging. The message “charging” will
disappear and the screen just returns back to its normal mode. The battery icon will also stop
blinking.
When the screen turns into power save mode, the battery icon will stop blinking to save the
power. It will resume blinking after you touch any button of AU500 and the screen is out of
power save mode.
When AU500 is in charging, it could not be turned off.
Please don’t leave the battery at extreme low level for too long time cause this will shorten the
life time and operational time of the battery.
To Next Page
Loading...