AUTEC Air series - General Operating Instructions; Power Keyswitch; START Pushbutton; Unit

LIUSK8B00_eng-01AUTEC
21
8 General operating in󰄋ructions
8.1 Power keyswitch
The Transmitting Unit always has a power keyswitch called T-key that allows to power the Unit.
The Radio Remote Control cannot work if the power keyswitch is not inserted in the Transmitting
Unit.
8.1.1 Inserting the power keyswitch
insert the power keyswitch into its receptacle.
8.1.2 Removing the power keyswitch
Pull the power keyswitch to remove it from its receptacle.
8.2 START pushbutton
The START pushbutton is used to:
- 󰘵art the Radio Remote Control (see paragraph 8.9)
- activate the horn when the Radio Remote Control is 󰘵arted.