AUTEC Air series - DISPLAY Pushbutton (if the Transmitting Unit Has a Display); Battery

LIUSK8B00_eng-01AUTEC
23
8.5 DISPLAY pushbutton (if the Transmitting Unit has a display)
The functions of this pushbutton are:
- Activates the display lighting.
- It cyclically scrolls the information on the display in two di󰘯erent modes:
- Manual: the lines scroll up each time the pushbutton is pressed.
- Automatic: when the DISPLAY pushbutton is pressed for 3 seconds, the lines scroll
automatically. If the DISPLAY pushbutton is pressed again, it switches back to Manual
mode.
It is not possible to scroll the lines if icons only are displayed.
The display lighting 󰘵ays on for a time set by the Machine Manufacturer.
8.6 Battery
The Air series' Transmitting Units can only be powered by Autec rechargeable
batteries.
For any warnings and in󰄋ructions regarding the battery, see "Part E" in the
In󰄋ruction Manual.
8.6.1 Battery insertion
To insert the battery, proceed as follows:
1. Push the battery towards the contacts of the Transmitting Unit.
2. Insert the battery in its housing.
The battery slides easily into place and ensures that the positive (+) and negative
(-) poles are correctly connected only if it is inserted with the plate facing its housing,
so that the battery's contacts match the Transmitting Unit's contacts.