AUTEC Air series - Preventive replacement of the Radio Remote Controls electromechanical components

9.5 Preventive replacement of the Radio Remote Control's electromechanical
components
9.5.1 Actuators (joysticks, pushbuttons and switches)
As provided by the Manufacturer of each actuator in the corresponding technical speci󰘰cation,
each actuator of the Transmitting Unit can be used for a de󰘰ned “maximum number of
operations”, as shown in the table below. The “maximum number of operations” must not be
considered as a warranty period.
The Maintenance Technician must replace joysticks, pushbuttons and
selectors on the Transmitting Unit before they reach the maximum number
of operations, even though they are still working.
This replacement prevents possible failure and dangerous situations (by
way of example: inadvertent activation and/or deactivation of the command
activated by the actuator).
Actuator Max. operations Actuator Max. operations
5x10
6
5x10
6
5x10
6
10
6
3x10
6
6x10
6
48
LIUAIR002_eng-00
Maintenance
AUTEC - Air series