LIMBS0U3-00_eng.fm Page 25
DC battery charger
EN
If the supply cable cannot be unplugged (i.e. fix connection
to a battery), a switch shall be easily accessible, in order to
disconnect the power supply.
If, on the other hand, the supply cable can be unplugged (i.e.
plug at the end of the cable) it shall always be easily acces-
sible.
Instructions for use
Battery charger MBC930D can only recharge MBM06MH bat-
teries: if it is used in a different way, it is used improperly
and dangerously. Autec shall not be held liable for conse-
quences due to improper, wrong or irrational use.
DC battery chargers have two signalling lamps:
CHARGE LIGHT (YELLOW) MEANING
Off
The battery is fully charged or is not
inserted
Blinking
(when inserting the battery)
The battery is completely discharged
Steady on The battery is being recharged
POWER LIGHT (GREEN) MEANING
Off The battery charger is not powered
On The battery charger is powered
To Next Page
Loading...
