LIMJNMU0 6 - MJ transmitting unit operation Page 23 of 71
English
6 MJ TRANSMITTING UNIT OPERATION
POWER AND STARTING
To switch on the transmitting unit, in-
sert the starting key and turn it to "I".
To start the radio remote control
functions, press the “START” button
for 1-2 seconds.
After starting, the green signalling
LED always lights up.
COMMAND ACTIVATION
Activate the joystick and/or se-
lector actuators relevant to
whatever movement or selec-
tion command is to be carried
out.
SIGNALS
TYPE MEANING ACTION
blinking green LED OPERATION NORMAL ///
blinking red LED, accom-
panied by intermittent
sounds from the buzzer
LOW BATTERY.
The transmitting unit switches
off 3 and half minutes after the
LED starts flashing
Switch off the transmit-
ting unit and replace
the battery
steady red LED at start-
ing, accompanied by the
continuous sound from
the buzzer
ONE OR MORE (movement)
ACTUATORS and/or STOP
PUSHBUTTON INSERTED
Release actuator(s)
and the STOP push-
button
To Next Page
Loading...