EasyManuals Logo

Autel AutoLink AL529 Quick Reference Guide

Autel AutoLink AL529
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Email: sales@autel.com
Web: www.autel.com
AutoLink AL529/AL529HD
Getting Started
Connect the OBD II cables 16-pin male adapter to the
Vehicles DLC which is generally located under the vehicle
dash.
The device will be automatically powered up.
1 2
3 4
IMPORTANT: Before operating or maintaining this unit, please read these instructions carefully. Use this unit
correctly and properly. Failure to do so may cause damage and/or personal injury and will void the product
warranty.
Your AutoLink AL529/AL529HD is now ready to work.
Connect the OBD II cables female adapter to the AutoLink
AL529/AL529HD
Tighten the captive screws.
Scan QR Code to visit our website at www.autel.com.
Create an Autel ID and register the product with devices
SN and password.
Thank you for purchasing AUTEL tool. Manufactured to a high standard, our tool will, if used according to these
instructions and properly maintained, give you years of trouble-free performance.
Quick Reference Guide

Other manuals for Autel AutoLink AL529

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Autel AutoLink AL529 and is the answer not in the manual?

Autel AutoLink AL529 Specifications

General IconGeneral
LanguagesEnglish, Spanish, French
Display2.8 inch color display
CompatibilityOBD II compliant vehicles
FunctionsRead and clear codes, live data, freeze frame, I/M readiness
Operating Temperature0 to 60 °C
Storage Temperature-20 to 70°C (-4 to 158°F)
ConnectivityOBDII
Supported ProtocolsCAN, J1850 PWM, J1850 VPW, ISO9141

Related product manuals