EasyManua.ls Logo

Autoelectric JMP10GPBL - Page 9

Default Icon
13 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8
2. Recharge through the Car Cigarette Lighter Socket:
z
Insert the small plug from the supplied car adapter to the DC (in) Jack on the unit.
Insert the Car Adaptor to the Cigarette lighter socket on your car as the figure below:
z
During charging, the Blue Indicators will light and blinking. When finished, all the 5
pcs Blue Indicators will light and stop blinking.
NOTES:
A. Connect to the Cigarette Lighter Socket of a vehicle that has a 12V battery only. It is
not compatible with a vehicle that has a 24V battery.
B. This is a special negative grounded Car Adapter. Using this Car Adapter with a plus
grounded car can cause malfunction.
C. Do NOT plug in the Car Adapter until the car ignition is turned on.
D. Disconnect the Car Adapter from the cigarette lighter socket after use.