- 8 -
CHARGING WHEN BATTERY IS OUTSIDE VEHICLE
1. Connect the POSITIVE (red) charger clip to the POSITIVE (POS, +)
post of the battery.
2. Connect the NEGATIVE (black) charger clip to the NEGATIVE
(NEG, -) post of the battery.
3. Connect the AC supply cord to the electrical outlet.
4. When disconnecting the charger, always do so in the reverse order
of the connecting procedure and break the first connection while as
far away from the battery as practical.
NOTE that a marine battery must be removed and charged on shore.
To charge it onboard requires equipment specially designed for
marine use.
AC CONNECTIONS
1. This battery charger is for use on 110-120 Vac and 220- 240 Vac
separately. Check your AC volt and make sure the version you take
is correct.
2. The plug must be plugged into an outlet that is properly installed
and grounded in accordance with all local codes and ordinances.
3. The plug pins must fit the receptacles. Do not use with an
ungrounded system.
4. Never alter AC cord or plug provided. If it does not fit the outlet,
have prosper grounded outlet installed by a qualified electrician.
Improper connection can result in a risk of an electric shock or
electrocution.
To Next Page
Loading...