COMPRESSOR OPERATION
Cauon: Run compressor only for 10 minutes at a me connuously, then leave o for
10 minutes before using again so that the compressor can cool.
1. Switch the compressor power switch on. You should hear the compressor start.
2. For tyre inaon use the universal adapter that is aached permanently to the air
hose. Place this adapter (refer Figure 2, No. C) onto the tyre valve
stem, press the adapter lever down to lock onto the valve system.
3. For inaon of leather balls, otaon devices, etc, use one of the
plasc nozzles.
4. Check pressure gauge (refer Figure 2, No. A), to determine the de-
sired pressure. This is only an indicator, for exact inaon pressure use a quality pres-
sure gauge.
5. Turn on power switch (refer Figure 2, No. B).
6. When the desired pressure is reached turn the compressor switch o (refer Figure 2,
No. B).
7. Remove the adapter (refer Figure 2, No. C) from the tyre or other item being inated.
BATTERY DISPOSAL
The lead acid baery contained in the powerstaon should be recycled once it has expired.
Please contact your local government for recycling informaon.
Warning: Do NOT dispose of the baery in an open ame as this may result in an explosion
and toxic fumes.
Warning: Before disposing of the baery, protect exposed terminals with heavy-duty elec-
trical tape to prevent shorng (shorng can result in injury or re). Do NOT expose baery
to re or intense heat as it may explode.
ENVIRONMENTAL MESSAGE
This appliance needs to be disposed of in an environmentally friendly way when it be-
comes of no further use or has worn out. Contact your local government for details of
where to take the item for re-cycling.
This product has no user serviceable parts.
To Next Page
Need help?
General
