Chapter 5 - System Setup Screens
5-30
®
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
B
C
D
EA9-USER-M Hardware User Manual, 1st Ed. Rev. K
Test Menu – PLC Enquiry Test: Serial Connection
This function allows the ability to select any PLC that
may be connected to the touch panel through the
selected serial comm. port connection and checks to
see if the communications are working correctly.
NOTE: The communications protocol for the PLC
being selected must be configured the same as the
C-more touch panel. The touch panel’s PLC serial
communications are configured using the C-more
Programming Software’s Panel Manager.
PLC Enquiry Test
Four test packets are sent to the selected PLC. The test result with return either Pass or Fail.
To Next Page
Loading...