Chapter 4: AC Drive Parameters
4–8
Parameter Summary (continued)
Parameter
*
Description Range*
Default
Setting
User
Setting
Presets Parameters
P5.00
Jog Speed 0.0 to 400.0 Hz 6.0
P5.01
Multi-Speed 1 0.0 to 400.0 Hz 0.0
P5.02
Multi-Speed 2 0.0 to 400.0 Hz 0.0
P5.03
Multi-Speed 3 0.0 to 400.0 Hz 0.0
P5.04
Multi-Speed 4 0.0 to 400.0 Hz 0.0
P5.05
Multi-Speed 5 0.0 to 400.0 Hz 0.0
P5.06
Multi-Speed 6 0.0 to 400.0 Hz 0.0
P5.07
Multi-Speed 7 0.0 to 400.0 Hz 0.0
P5.08
Multi-Speed 8 0.0 to 400.0 Hz 0.0
P5.09
Multi-Speed 9 0.0 to 400.0 Hz 0.0
P5.10
Multi-Speed 10 0.0 to 400.0 Hz 0.0
P5.11
Multi-Speed 11 0.0 to 400.0 Hz 0.0
P5.12
Multi-Speed 12 0.0 to 400.0 Hz 0.0
P5.13
Multi-Speed 13 0.0 to 400.0 Hz 0.0
P5.14
Multi-Speed 14 0.0 to 400.0 Hz 0.0
P5.15
Multi-Speed 15 0.0 to 400.0 Hz 0.0
* Some parameters and settings are available only in later firmware versions of DURAPULSE drives. Refer to
the beginning of this “DURA
PULSE Parameter Summary” section for more information.
Parameter can be set during RUN Mode.
DURAPULSE AC Drive User Manual
1st Ed. Rev. D 05/2013
To Next Page
Loading...