8 Timer Mode
© Copyright Reserved Autonics Co., Ltd. 67
8.3 Timer operation for indicator model
※Only for indicator model.
TOTAL
[TOTAL]
When memory protection setting is OFF
1) Time starts when INA input is ON.
2) Setting value is initialized when Reset input is ON.
3) Time progress stops when INHIBIT input is ON.
4) Resets when power is OFF.
When memory protection setting is ON
1)Time starts when INA input is ON.
2) Setting value is initialized when Reset input is ON.
3) Time progress stops when INHIBIT input is ON.
4) Display value at the moment of power OFF is memorized.
To Next Page
Loading...
