K-95
(A)
Photo
electric
sensor
(B)
Fiber
optic
sensor
(C)
Door/Area
sensor
(D)
Proximity
sensor
(E)
Pressure
sensor
(F)
Rotary
encoder
(G)
Connector/
Socket
(H)
Temp.
controller
(I)
SSR/
Power
controller
(J)
Counter
(K)
Timer
(L)
Panel
meter
(M)
Tacho/
Speed/ Pulse
meter
(N)
Display
unit
(O)
Sensor
controller
(P)
Switching
power
supply
(Q)
Stepping
motor&
Driver&Controller
(R)
Graphic/
Logic
panel
(S)
Field
network
device
(T)
Software
(U)
Other
⑤
Complete to yearly holiday
Press
MODE
key to fi nish the
additional yearly holiday
setting and press
SET
key to
set .
※
It is able to set yearly
holiday up to 12 times.
SUN MON TUE WED THU FRI SAT
①
Advance to Program1(P1) yearly program setting mode
Press
MODE
key for 3 sec. in
RUN mode, "
P
"
fl ashes
and
press
MODE
key once, then,
"
P
"and YEAR fl ash and
press
SET
key to set.
②
Mode type setting
Press
SET
key when ON/OFF
fl ashes.
③
Start date setting
Press
key until month
position flashes and set Apr
by
or key and press
key until date position
fl ashes. Press
SET
key after
set 5th by
or key.
①
Advance to yearly holiday mode
Press
MODE
key over 3sec.
to move to the setting group1
in RUN mode and press it
repeatedly until " "
fl ashes
in second display part and
press
SET
key.
②
Yearly holiday No. display
Press
SET
key after check
yearly holiday No.
③
Start date of yearly holiday setting
Press
key until month( )
position fl ashes and set
May by
or key and
press
key until date
position flashes. Press
SET
key after set 5th by
or
key.
④
End date of yearly holiday setting
The fl ashing is moved to
month(
) position directly
and press
or key to set
May and
press key until
date position
fl ashes.
Press
SET
key after set 5th
by or key.
①
Advance to weekly day change mode
Press
MODE
key over 3sec.
to move to the setting group1
in RUN mode and press it
repeatedly until " "
fl ashes
in second display part and
press
SET
key.
②
Standard day selection
Press
key to move the
indicator to saturday and
press
SET
key. after select
saturday as standard day(Sat
turns ON) by
or key.
③
Change day selection
Press
key to move the
indicator to monday and
select monday to change
(Monday turns ON) by
or
key and repeat the procedure
to select tuesday to change
(Tue turns ON) and press
SET
key to complete.
Yearly program setting
● Yearly ON/OFF mode
(Ex) Output(OUT) is ON from every 5, Apr to 7, Apr at
9:00AM and OFF 5:10PM.
Program setting
Yearly holiday mode
It operates to off the output without program adjustment
during previously set yearly holiday period available from
present year to 31, Dec. of the next year.
Designate the start date of yearly holiday and year of end
date as every year("--") to repeat the holiday mode for specifi ed
in every year.
● Setting example
Set every year 5, May to off the output.
SUN MON TUE WED THU FRI SAT
SUN MON TUE WED THU FRI SAT
SUN MON TUE WED THU FRI SAT
SUN MON TUE WED THU FRI SAT
SUN MON TUE WED THU FRI SAT
SUN MON TUE WED THU FRI SAT
SUN MON TUE WED THU FRI SAT
SUN MON TUE WED THU FRI SAT
SUN MON TUE WED THU FRI SAT
SUN MON TUE WED THU FRI SAT
Weekly/Yearly Timer
To Next Page
Loading...
