Autonics TX4S Series - Specifications

Input type Decimal point Display Input range(℃) Input range(℉)
Thermocouple
K (CA)
1 KCA.H -50 to 1200 -58 to 2192
0.1 KCA.L -50.0 to 999.9 -58.0 to 999.9
J (IC)
1 JIC.H -30 to 800 -22 to 1472
0.1 JICL -30.0 to 800.0 -22.0 to 999.9
L (IC)
1 LI.H -40 to 800 -40 to 1472
0.1 LIC.L -40.0 to 800.0 40.0 to 999.9
T (CC)
1 TCC.H -50 to 400 -58 to 752
0.1 TCC.L -50.0 to 400.0 -58.0 to 752.0
R (PR) 1 RPR 0 to 1700 32 to 3092
S (PR) 1 5PR 0 to 1700 32 to 3092
RTD
DPt 100Ω
1 DPt.H -100 to 400 -148 to 752
0.1 DPt.L -100.0 to 400.0 -148.0 to 752.0
Cu50Ω
1 CU5.H -50 to 200 -58 to 392
0.1 CU5.L -50.0 to 200.0 -58.0 to 392.0
The above specifications are subject to change and some models may be discontinued without notice.
Be sure to follow cautions written in the instruction manual and the technical descriptions (catalog, homepage).
Specifications
Series TX4S TX4M TX4H TX4L
Power supply 100-240VAC 50/60Hz
Allowable voltage range 90 to 110% of rated voltage