The document is an Owner's / Installation Manual for the AutoPilot ChlorSync® Salt Chlorine Generator, Gen II. This device is designed to produce chlorine for swimming pools using salt, providing an automated and efficient method of sanitization. The manual covers installation, operation, and maintenance, ensuring users can effectively set up and manage their chlorinator.
Function Description:
The AutoPilot ChlorSync® is a salt chlorine generator that converts salt (sodium chloride) dissolved in pool water into chlorine. This process, known as electrolysis, eliminates the need for manual addition of chemical chlorine, offering a more consistent and gentler form of sanitization. The system continuously monitors and adjusts chlorine output based on user settings and pool conditions, maintaining optimal water chemistry. The Gen II model likely includes enhancements in efficiency, control, or connectivity compared to previous generations. The core components include a Power Center, which houses the control electronics, and a cell (not explicitly detailed in the table of contents but implied by "Connecting Cell"), where the electrolysis takes place. The system integrates with the pool's existing filtration system, ensuring that chlorinated water is circulated throughout the pool.
Important Technical Specifications (Inferred from Table of Contents):
While specific numerical specifications like voltage, current, or chlorine production rates are not detailed in the table of contents, the manual indicates several technical aspects:
- Power Center: This is the central control unit for the chlorinator, managing the electrolysis process and user interface.
- Cell: The component responsible for converting salt into chlorine. The manual mentions "Connecting Cell" and "Cell Output Control," indicating its critical role and adjustable nature.
- Tri-Sensor Cable: This suggests the system uses a multi-function sensor, likely to measure water flow, temperature, and potentially salt levels, to optimize chlorine production and ensure safe operation.
- Wi-Fi Installation (optional equipment not included): This indicates that the Gen II model supports Wi-Fi connectivity, allowing for remote monitoring and control, though the Wi-Fi module itself is an optional add-on.
- Fuse Replacement: The inclusion of "Fuse Replacement" in maintenance suggests the Power Center has protective fuses, indicating specific electrical requirements and safety features.
- Salt Calibration: The system requires calibration for salt levels, implying an internal sensor or a method to input salt concentration for accurate operation.
Usage Features:
The ChlorSync® system offers a range of features designed for ease of use and effective pool management:
- Display: The Power Center includes a display for viewing operational status, settings, and diagnostic information.
- Cell Output Control: Users can adjust the chlorine output level to match the specific needs of their pool, accommodating varying bather loads, weather conditions, and pool sizes.
- Sanitizer Output Adjustments: This feature allows for fine-tuning the sanitization process, ensuring optimal water quality.
- Diagnostic Menu: A built-in diagnostic menu helps users troubleshoot issues and monitor system performance, providing valuable information for maintenance and problem-solving.
- Boost Mode: This mode allows for a temporary increase in chlorine production, useful for periods of heavy use, after rain, or to quickly address algae issues.
- Quick Start / Basic Operation: The manual provides clear instructions for initial setup and daily operation, making it accessible for new users.
- Pool Cover Detection: This feature suggests the system can detect when a pool cover is in place, potentially adjusting chlorine output to prevent over-chlorination and save energy.
- Options and Features: The appendix section indicates a detailed discussion of various functionalities and customizable settings available to the user.
- Approvals and Compliance: This section would cover certifications and standards met by the device, assuring users of its quality and safety.
Maintenance Features:
Regular maintenance is crucial for the longevity and efficiency of the ChlorSync® system, and the manual provides comprehensive guidance:
- Water Balance and Chemistry: Detailed instructions on maintaining proper pool water chemistry, including pH, alkalinity, calcium hardness, and stabilizer levels, which are critical for the effective operation of a salt chlorinator and the health of the pool.
- Servicing: This section covers general servicing procedures, including:
- Breakdown - Inspection - Cleaning - Re-assembly: Instructions for disassembling, inspecting, cleaning (likely referring to the cell for scale buildup), and reassembling components. This is a key maintenance task for salt chlorinators.
- Fuse Replacement: Guidance on how to safely replace fuses in the Power Center, addressing potential electrical issues.
- Winterizing: Procedures for preparing the chlorinator for cold weather, preventing damage from freezing temperatures.
- Spring Start Up: Instructions for bringing the system back online after winterization, ensuring a smooth transition into the swimming season.
- Troubleshooting: A dedicated section to help users identify and resolve common issues, including:
- Fault Codes: Explanations of error codes displayed on the Power Center, guiding users to specific problems.
- Issues and Resolutions: A list of common operational problems and their corresponding solutions, empowering users to perform basic troubleshooting before contacting support.
The AutoPilot ChlorSync® Gen II is designed to be a user-friendly, efficient, and reliable solution for pool sanitization, minimizing manual chemical handling and providing automated chlorine generation. Its features cater to both ease of operation and comprehensive maintenance, ensuring a clean and healthy swimming environment.
To Next Page
Need help?
General
