AUX XK05 - System Details and Faults; Room Temperature Sensor; Fault Code Display

EN
• "Shielding" function display
When unit is locked by centralized control, the wired controller will display "Q
• "Mute" function display
When the unit enter silent function, display "⑱•' icon, when silent function is
cancelled,the icon does not display.
Note: The unit without silent function can also set silent through wired controller,
but it shows in the way of low wind grade, but"⑱" does not display.
• "Oil Return / Defrost" function display
When the unit is running in the state of Oil Return or Defrost,"®" icon is
lighting on wire controller.
When the unit has finished Oil Return or Defrost process,"®" icon does not
display.
• "Filter Screen Clean"function display
Filter screen cleaning reminder function: The unit can record its running time,
when reaching the time set by the user, it will remind the user to clean the
filter screen, so as to avoid prolonged cleaning and filter screen blockage,
which can result in poor heating/cooling effect, abnormal protection, bacterial
breeding, and other problems.
When the running time reaches the filter screen cleaning reminder time set
by a user, the unit will give out a reminder of filter screen cleaning, wired
controller displays"S'" icon, reminding the user to clean filter screen.
At this moment, long press "Timer" button for 5S to cancel the reminder, then
the icon does not display. A filter screen cleaning reset signal is sent to the unit.
• Celsius and Fahrenheit switching display
When users set Celsius to be valid, the wired controller will display Celsius
temperature. When users set Fahrenheit to be valid, the wired controller will
display corresponding Fahrenheit temperature synchronously.
• "Child Lock" function display
Press both "A " and "V " buttons for more than 5S to enter locking, the
controller will display " ^ . In the state of locking, operations on the wired
controller are disabled (but remote control receiving is valid).
The method of unlocking: Press both "A " and " V " buttons for more than
5S or power off the unit to release the locking (" ^ " does not display).
• Remote control function
The wired controller can receive remote control commands and update the
current status.
12