1. Place the scale in the desired
location and level the platform
2. Lift the stainless steel platform
off the base
3. Adjust the feet to center the
level bubble.
4. Install the stainless steel platform.
5. Install the batteries or plug in
the adapter.
6. The scale is now ready for use.
• Scale
• Manual
• C9V 600mA Power Adapter
UNPACKING & SETUP
3.
PACKING LIST
UNPACKING & ASSEMBLY
Indicator and platform are NTEP certified, making the scale capable of being used in Legal for Trade applications.
However, the scale is not Legal for Trade until it has been certified and registered by an authorized Weights and
Measures agent.
See www.ncwm.net/content/regions for a listing of registered US Weights and Measure offices by state.
To Next Page
Loading...
