1. Remove the scale from the box and place it on a firm, level surface. Avoid locations
with rapid temperature changes, excessive dust, moisture, air currents, vibrations,
electromagnetic fields, heat or direct sunlight.
2. Adjust the leveling feet until the bubble is centered in the circle of
the level indicator (located on the front panel).
NOTE: Ensure that the scale is level each time its location
is changed.
3. The internal rechargeable battery should be fully charged for up to 12 hours before
using the scale for the first time.
4. Connect the supplied AC adapter to the power input receptacle underneath the scale.
Plug the AC adapter into a properly grounded power outlet. The battery will begin
charging.
5. If the scale will be stored or transported in the future, save the packaging material to
ensure the best possible protection for the scale.
• Scale
• Manual
• C9V 600mA Power Adapter
• (4) AA Batteries
UNPACKING & SETUP
3.
PACKING LIST
UNPACKING & SETUP
To Next Page
Loading...
