1. Under the normal working mode, press and hold
ON/OFF
key and 4 key at the same time until the
WEIGHT
window shows “SETUP” . Under this mode, you can set the RS232 baud rate, data format and
communication format.
2. After entering into this mode, the
WEIGHT
window will show “Setup”, the
UNIT PRICE
window will show
“232.oUt” (RS232 output content format) and the
TOTAL PRICE
window shows one of following content:
2.1 HOST (334PCS40/334PCS40T) is connected with host device, e.g. a PC)
2.2 Prtd40 (334PCS40/334PCS40T) is connected with the OS-2130D, label dimension is 58mm × 40mm,
date will be printed on label)
2.3 Prtd60 (334PCS40/334PCS40T) is connected with the OS-2130D, label dimension is 58mm × 60mm,
date will be printed on label)
2.4 PrtNd4 (334PCS40/334PCS40T) is connected with OS-2130D, label dimension is 58mm × 40mm, no
date will be printed on label)
2.5 PrtNd6 (334PCS40/334PCS40T) is connected with the 2130D, label dimension is 58mm × 60mm, no
date will be printed on label)
Use numerical keys 0,1,2,3,4 to choose RS232 output content format (0-HOST, 1- Prtd40, 2- Prtd60, 3-
PrtNd4, 4- PrtNd6), use
ENTER
key for confirmation to go to the next step, or
ON/OFF
key to exit this
mode.
3. Then, the
WEIGHT
window will show “Setup”, the
UNIT PRICE
window will show “232.bPS” (RS232 band
rate: bit per second) and
TOTAL PRICE
window shows baud rate xxxxx. Use numerical keys
1,2,3,4,5
to
choose RS232 baud rate:
1--1200bps
2--2400bps
3--4800bps
4--9600bps
5--19200bps
Press
ENTER
key for confirmation to go to the next step, or
ON/OFF
key to exit this mode.
4. Then, the
WEIGHT
window will display “232.dFt” (data format), the
TOTAL PRICE
window will display
data format xxx. Use
1, 2, 3
key to select data format:
1—8N1 8 bits data, no odd or even , 1 start bit, 1stop bit
2—7O1 7 bits data, 1 even , 1 start bit, 1stop bit
3—7E1 7 bits data, 1 odd, 1 start bit, 1stop bit,
Press
ENTER
key to confirm the input and go to the next step, or use
ON/OFF
key to exit this mode.
5. Then, the
WEIGHT
window will display “Prtd.dt” (OS-2130D print date format), the
TOTAL PRICE
window will display data format xxx. Use
0, 1, 2
key to select data format:
0—CANADA Canadian format: YY MM DD
1—USA USA format: DD-MM-YY
2—Numerical format: YY.MM.DD
Press
ENTER
key to confirm the input and go to the next step, or use
ON/OFF
key to exit this mode.
6. Then, the
UNIT PRICE
window shows “USb.oUt” (USB output content format) and the
TOTAL PRICE
window shows HOST (the scale is connected with host device, e.g. a PC), use
ENTER
key for confirmation
to go to the next step, or
ON/OFF
key to exit this mode.
7. Then, the
WEIGHT
window will show “SETUP”, the
UNIT PRICE
window will show “USb.bPS” (USB band
rate: bit per second) and
TOTAL PRICE
window shows baud rate xxxxx. Use numerical keys
1,2,3,4,5
to
choose RS232 baud rate:
1--1200bps
2--2400bps
3--4800bps
4--9600bps
5--19200bps
Press
ENTER
key for confirmation to go to the next step, or
ON/OFF
key to exit this mode.
11.
DETAILS ABOUT RS232 COMMUNICATION
To Next Page
Loading...
