Need help?Do you have a question about the AvaLAN AW58EMVAP and is the answer not in the manual?
General| Frequency Band | 5 GHz |
|---|---|
| Wireless Standard | 802.11a/n |
| Maximum Data Rate | 300 Mbps |
| Operating Temperature | -40°C to 70°C |
| Ingress Protection Rating | IP67 |
| Mounting | Pole or wall mount |
| Antenna Type | External |
Provides contact information for technical support regarding installation issues.
Indicates severe injury or death hazard if not avoided.
Indicates severe injury or death hazard if not avoided.
Indicates minor injury hazard if not avoided.
Highlights important information affecting component integrity or operation.
Details for the 5 GHz Wireless Forecourt Access Point.
Details for the 5 GHz Wireless In-Dispenser Communications System.
Notes on installation codes (NFPA) and static wrist strap usage.
Emphasizes using an anti-static wrist strap when handling components.
Guidelines for packaging components and ensuring adequate insurance for returns.
Adherence to NFPA/CSA codes, emergency power cutoff, and electrical circuit precautions.
Specifies operational temperature range for AW58EMVAP.
Specifies the required 24VDC input voltage for AW58EMVAP.
Specifies operational temperature range for AW584EMVSU.
Specifies the required 24VDC input voltage for AW584EMVSU.
Covers power wiring, emergency stop circuits, and adherence to codes like NFPA 70/30A.
Lists essential tools (Anti-Static Wrist Strap) and required parts for the installation.
Visual guide showing dimensions, clearance, and connection points (power, Ethernet, ground).
Critical notes on NFPA compliance, cable routing, grounding, and power supply.
Lists components included with the AW584EMVSU unit.
Lists components included with the AW58EMVAP unit.
Step-by-step guide for mounting the AW584EMVSU unit inside the dispenser.
Instructions for connecting Ethernet, grounding, and power cables to the unit.
Guide for mounting the AW58EMVAP Access Point indoors, including mounting options.
Procedure for pairing radio units using USB keys and verifying successful pairing.
Steps for installing subscribers, keying radios, and registering the access point online.
Instructions for registering the access point online and monitoring site status.
Details on viewing dispenser status, USB Key IDs, and signal strength.
Information on subscribing to email and text alerts for outages.
To Next Page
