10
Getting Started
Operation Instructions
5. Once the switches are in the on (I) position
the heating indicator light (#2) and the
cooling indicator light (#3) will turn on. It will
take about 15 – 20 minutes for the hot water
to heat to the appropriate temperature. It will
take about 1 hour for the cold water to cool
to the appropriate temperature.
6. When the water has reached the
appropriate temperatures for hot and
cold the indicator lights will turn o
and the water is ready for use. The
indicator lights will turn back on
automatically when the machine
needs to reheat or cool again.
15-20
min
1 hr
HotCold
7. To replace the bottle vertically, pull out
the empty bottle with two hands. Using
two hands place the new bottle of water
vertically into the bottle supporter (#8).
To Next Page