13
Rinsing, Cleaning, and Draining
3. Dispense about 2 liters of
water from the unit into a bucket
by pressing dispense buttons for
each temperature.
4. Place a large bucket beneath the
drain outlet (#17) located on the back
of the unit. Remove the drain cover and
plug and allow the water to drain from
the unit. Water will start flowing as
soon as the drain cover is removed.
Caution: The dispenser will heat water to a temperature of approximately 185°F.
It can cause severe burns if not handled carefully. Please use caution while
operating and cleaning.
To Next Page
Loading...