Avantco Equipment MX10 - Page 7

User Manual
www.AvantcoEquipment.com 7
Qty
15
16
17
1
5
1
1
1
1
2
axle
14
2
1
3
4
5
6
Descviption
Item
4
1
7
8
NOTES
Machine at a factory hour have added to
note the superior quality lubricates the
grease, usually the circumstance bottom
can use for several years, but machine is
after maintaining, must replace the lubri-
cation grease.
cover
screw M5*35
plate
bearing 6202
bearing 6201
screw M5*12
bearing cover
screw M5*20
screw
axle
1
2
4
3
8
9
7
10
11
13
12
4
5
6
18
1
1
4
1
1
1
10
9
11
12
13
14
1
1
15
16
rear cover
body
screw M6*55
screw M5*12
arm
stand
capacitor board
1
1
17
18
capacitor
seat
breeze window
21
20
19
1
19
safefy covering switch
1
1
20
21
fluctuate safety switch
overload protection switch
Before using, please check power supply if it match
your machine and be sure ground wire is eliable.
Before testing, please take mixing device off first, in
order to avoid damage machine which is match mo-
ving direction. It's necessary to change the three-ph-
ase machine if the moving direction is not match wi-
th arrow.
Mixing: according to the different mixing-material.
Choose the different mixing devices and speed.
A: Be suitable for mix and stir butter, eggs, and work wi-
th in high speed, working time is less than 15 minutes.
B. Be suitable for mix and stir stuffing and raw material,
and work in middle speed, working time is less than 20
minutes.
C: middle position is suitable for mixing dough,
working time is less than 30 minutes.
Flour wat-
er quantity is 40%-50%.
A
B
C
110-120V
11
For changing the speed: Please stop machine first
before change speed in order to aviod damage gear
box.
OFF
220-240V
TRANSMISSION CASE, ARM, STAND
FIGURE 1
NOTES:
The factory has provided superior lubricant for
several years of use. If the mixer is repaired
please ensure that the service technician
replaces any lubricant lost or removed.
Please lubricate bearings before reng
bearing covers.