1.2. The USB hub
The USB hub mounted in the top left corner of the case is used to charge each headset
via the connected cables. When the unit is charging you will see a green light appear on
the hub.
1.3. Charging the headsets
To charge the headsets, carefully place them back into the carry case making sure the
USB-C cable within the case is accessible. Then connect the cable to the USB-C port on
the bottom of the headset. When each device is charging you will see a light appear on the
bottom of the headset.
When the headsets are fully charged, we recommend switching the power supply o at the
mains. Make sure the headsets are fully charged before first use.
Make sure that the circle in the ClassVR logo is facing down when placed back into the
case. This ensures that the USB-C socket will be on the correct side.
3
To Next Page
Loading...
Need help?
General