AVANTO CHEST LIGHT PRO - Power Button Operation; Light Modes and Battery Life; Charging the Battery; Charging Procedure

POWER BUTTON OPERATION
One-touch - Light on 100% power (Bat-
tery life approx. 3h)
Second press - Light on 50% power (Bat-
tery life approx. 5h)
Third press - Light off
We recommend using 50% light output if
it is completely dark around you.
Important! Do not leave the light on unaended! Your light has a Lithium polymer-type bae-
ry. Such a baery gives off power and the light is on brightly and does not dim until the power
is almost exhausted. When the light clearly begins to dim and the charge level shows only one
light, the baery is almost exhausted, then turn off the light. Deep baery discharge will da-
mage the baery and shorten baery life. The baery lasts for about 600 charges when used
correctly. If the light is not used for a long time, charge it before storage to prevent deep
discharge of the baery.
5 lights 80-100%
4 lights 60-80%
3 lights 40-60%
2 lights 20-40%
1 light 0-20%
You can see the
baery charge
status by the
charge status
lights:
CHARGING
The baery is charged at the factory
and the light is ready for use immedia-
tely. Connect the supplied USB cable to
the charging socket, connect the other
end of the cable to a suitable USB power
supply (eg. mobile phone charger, com-
puter - avoid high power chargers, they
may damage the baery!)
*Latauspistoke
ADJUSTING THE BEAM ANGLE
Adjust the beam to a height that suits
you, according to your speed.
Mind others in traffic: Remember not to
aim the beam too high
Walker 2-3m
Runner 3-5m
Cyclist 5-10m
Charge
indicator