Avatar Controls Wi-Fi Smart Bulb - User Manual

17 pages

Save Page as PDF

To Next Page

To Next Page

Loading...

Wi-Fi Smart Bulb

User Manual

service@avatarcontrols.com

Questions and Answers

D
David DeleonJul 27, 2025
What to do if I cannot control Avatar Controls Wi-Fi Smart Bulb Home Lighting devices with Alexa/Google voice control?
- M
  Mr. Jose JacksonJul 28, 2025
  If you're having trouble controlling your Avatar Controls Home Lighting with Alexa or Google Assistant, here are a few things to check: * Ensure that the "AvatarControls" skill or service is enabled in your Alexa or Google app. * Confirm that the bulb is online within the AvatarControls app. Avoid turning off the bulb using the wall switch, as this will cause it to go offline. * Verify you are using the correct commands when speaking to Alexa or Google Assistant. Try repeating your question clearly in English. * If you've changed the bulb's name in the AvatarControls app, you'll need to rediscover the devices through the Alexa or Google app.
K
Kenneth CunninghamAug 11, 2025
How to fix Avatar Controls Home Lighting cannot connect to Wi-Fi?
- D
  danielmckeeAug 11, 2025
  If your Avatar Controls Home Lighting cannot connect to Wi-Fi, you can try the following: * Make sure that you have selected a 2.4 GHz Wi-Fi network, and that your phone is connected to the same network. If you have a dual-band router, ensure both your phone and the smart bulb are connected to the 2.4 GHz signal. * Double-check that you have entered the correct Wi-Fi password. * See if there are any internet problems. If needed, reset your Wi-Fi router and try again.

Summary

Smart Bulb Preparation and App Download

Download AvatarControls App

Obtain and install the AvatarControls mobile application.

Prepare Bulb for Wi-Fi Setup

Ensure correct Wi-Fi environment and bulb reset state.

Account Registration and Device Pairing

Create AvatarControls Account

Register your account for device management.

Add Smart Bulb to App

Begin the process of adding your bulb to the app.

Select Pairing Mode (EZ;AP)

Choose between EZ or AP pairing modes for connection.

Connect to Wi-Fi Network

Enter Wi-Fi credentials to connect the bulb.

Voice Assistant Integration

Control Bulb with Amazon Alexa

Link AvatarControls skill and use Alexa commands.

Control Bulb with Google Assistant

Link AvatarControls account and use Google Assistant.

Troubleshooting and Support

Wi-Fi Connection Troubleshooting

Solutions for common Wi-Fi connection issues.

Voice Control Troubleshooting

Resolve problems with Alexa/Google Assistant.

Product Notices and Warranty

Important product notices and warranty information.

Avatar Controls Wi-Fi Smart Bulb Specifications

General

Brand	Avatar Controls
Category	Home Lighting
Wattage	9W
Color Temperature	2700K-6500K
Base Type	E26
Dimmable	Yes
Color Capabilities	16 million colors
White Temperature Range	2700K-6500K
Wattage Equivalent	60W
Lifespan	25, 000 hours
Product Type	Smart Bulb
Connectivity	Wi-Fi
Color	RGB
Compatibility	Alexa, Google Assistant
Control Method	App, Voice
Actual Power Consumption	9W
Operating Temperature	-20°C to 40°C
Certification	RoHS