Avaya 1140E - Removing the Stand Cover

Using your IP Deskphon e
Removing the stand cover
To access the cable routing tracks and attach cables, you must remove the
stand cover. Pull upward on the center catch as indicated in the following figure,
and remove the stand cover. The cable routing tracks are now accessible.
Figure 9: Remove the stand cover
Connecting the AC power adapter (optional)
Your 1140E IP Deskphone supports AC power or Power over Ethernet
(PoE) options, including IEEE 802.3af standard power.
To use local AC power, use only the Avaya-approved Global Power Supply
(NTYS17xxE6). You can order the Avaya-approved AC adapter separately.
WARNING
Use only the approved Avaya Global Power
Supply with your 1120E IP Deskphone.