the first time you use your IP Deskphone, you need to complete some of the
following procedures:
• “Automatic login”
• “Selecting a language”
• “Logging on to your Avaya 1140E IP Deskphone”
• “Configuring the duration of the login”
• “User Profile”
Note: The system automatically logs you back on after a power outage or
firmware upgrade. The system administrator configures this feature on a
network-wide basis.
Automatic login
Before you first receive your IP Deskphone, your system administrator can
configure your IP Deskphone with your user logon and password. If this is the
case, after you plug in the IP Deskphone you can use it without further
configuration.
Note: If the IP Deskphone is configured with automatic logon, you cannot
use the log off function, and you need a password to access some features
and functions. Contact your system administrator or service provider for
further information.
Selecting
a
language
Your IP Deskphone has the capacity to operate using other languages, such as
French. The system administrator can provision the IP Deskphone with up to
five languages. If the IP Deskphone is provisioned with other languages, you
can choose an available language during the login process by pressing the
Lang context-sensitive soft key on the User Login page.
To Next Page
Loading...
