Avaya 1140E - Connecting the LAN Ethernet Cable

Accessing the IP Deskphone
Note: The IP Deskphone retains the previous user logon ID, which
appears after the ID prompt whenever the IP Deskphone reboots.
If Authentication is enabled by your system administrator, you can enter your
authentication ID independent of your user ID. The authentication ID is used when
the server challenges the IP Deskphone.
To logon to the Avaya 1140E IP Desk phon e :
abc
1. Press the abc/123 context-sensitive soft
key to toggle between alphabetic or numeric
input.
2. Use the dialpad to enter your user ID
login at the prompt.
Note: Use the left navigation key to
backspace and remove a previous user ID.
Login
abc
Login
3. Press the Login context-sensitive soft
key.
If Authentication is enabled by your
system administration, you are
presented with the Authentication ID
screen. The authentication ID is
autofilled with your user ID.
If Authentication is not enabled, a new
screen appears and prompts you for
your password.
a. Press the abc/123 context-sensitive
soft key to toggle between alphanumeric
or numeric input.
b. Use the dialpad to enter your
authentication ID login at the prompt.
c. Press the Login context-sensitive soft
key.
A new screen appears and prompts you
for your user password.