Avaya 1140E - Configuring the Duration of the Login

Accessing the IP Deskphone
Configuring the duration of the login
After you enter your logon ID and password the Duration screen appears. You
can enter the maximum length of time of the session. If you choose to use the
default duration Permanent, you remain logged on to the IP Deskphone until you
log off.
To configure the login dur at ion :
Next
Timed
1. Choose one of the following:
— Press the Next context-sensitive soft
key to configure the logon duration
to Permanent. A login confirmation
screen appears.
— Press the Timed context-sensitive
soft key to open a screen to
configure a maximum time to remain
logged in.
Note: If you press the Timed context-
sensitive soft key, you must then
configure the duration of the login.
Period
2. Press the Period context-sensitive soft
key to toggle the logon duration entries
between hours or days.
Next
Back
Cancel
3. Do one of the following:
— Use the dialpad to enter the number
of hours or days you want to remain
logged on and press the Ne xt
context-sensitive soft key.
— Press the Back context-
sensitive soft key to return to
the permanent logon screen.
— Press the Cancel context-
sensitive soft key to return to
the first logon screen.