Avaya 1140E - Configuring the Backlight

Configuring the Avaya 1140E IP De skphone
Configuring the Backlight
Note: Configuring the length of time the LCD screen remains backlit on the
IP Deskphone also adjusts the Expansion Module backlight time if you have
an Expansion Module connected to your IP Deskphone.
To configure the amount of time the LCD screen remains bac k lit :
Prefs
1. Press the Prefs context-sensitive soft
key, select Display, Display Set t ings
and then select Backlight from the menu.
2. Press the Left/Right navigation key to
increase or decrease the length of time you
want the idle screen to remain backlit.
Apply or Cancel
3. Choose one of the following:
— Press the Apply context-sensitive
soft key to configure the length of
time for the phone to remain backlit
and return to the Display menu.
— Press the Cancel context-sensitive
soft key to keep the existing
configurations and return to the
Display menu.