This section describes the controls on your IP Deskphone. Your IP Deskphone
can have fixed keys with icons or with labels. This document presents both
versions of the fixed key.
The keys on either side of the LCD display area
are
User-
d
ef
ined
feature keys, with labels on
the LCD. The system administrator can reserve
some keys for specific functions during tasks and
for advanced configuration.
You can define these keys for specific functions,
such as Call Forward.
Note: The key on the lower right is reserved as
your default line key.
Context-sensitive
soft keys are located below
the display area. The LCD label above each key
changes based on the active feature.
Use the Volume
control
buttons to adjust the
volume of the ringer, handset, headset, speaker,
and the Handsfree feature. Press the top button
to increase the volume, and press the bottom
button to decrease the volume.
Press the Mute key to listen to the call without
transmitting. Press the Mute key again to return
to two-way conversation. The Mute key applies to
handsfree, handset, and headset microphones.
Note: When you enable mute, a red LED on the
Mute key remains lit.
To Next Page
Loading...
