Avaya 1140E - Page 126

Configuring the Avaya 1140E IP Deskphone
126
4. If more than one device is paired, and
your headset is not already displayed in
the Paired box, press the Right
navigation key one or more times to
highlight the Paired box.
5. Press the Enter key to open edit mode.
6. Press the Up/Down navigation key to
open the list.
7. Press the Up/Down navigation key to
scroll through the list and highlight your
headset.
8. Press the Enter key to select the
headset and close the box.
9. Press the Enter key to exit edit mode.
10. Press the Right navigation key one or
more times to highlight the UnPair
button (next to the UnPair Device item).