While on an active call
202
Transferring a call
Note 1: When more than one call is on hold, the call you want to
transfer must be the active call. For more information, see “To make a
call on hold the active call:” on page 200.
Note 2: The IP Deskphone does not automatically place the call you
want to transfer on hold. To prevent the caller from hearing the
transfer process, place the caller on hold and then complete the
transfer process.
To transfer a call to another IP Deskphone:
— Enter 3 on the keypad.
— Press the Enter button.
— Press the Line button of the first held
call.
1. Press the Up/Down navigation key to
highlight Transfer Call from the menu.
To Next Page
Loading...
