While on an active call
207
Using account codes
Your system administrator can configure account codes on the IP Office
call server. Account codes can be used to keep track of calls in relation to
particular activities or clients. They can also be used to keep track of calls
by particular users or sets of users.
If your system uses account codes, you can enter an account code when
you make a call, or during a call. The account code that you enter must
match an account code set on the telephone system. If you enter an
invalid code, the deskphone prompts you to re-enter the account code.
To use an account code:
5. Press the OK soft key.
Note: If there is not currently an active
called parked that uses the ID that you
have entered, the deskphone displays
Forbidden.
1. Press the Feature soft key.
2. Press the Acct soft key.
The screen displays Account Code?
3. Press the Yes soft key.
The deskphone displays the prompt
Enter Account>.
To Next Page
Loading...
