Configuring custom settings
217
Using the relay option
You can use your IP Deskphone to activate external devices that are
connected to the IP Office server through a relay connection. For
example, you can use your IP Deskphone to activate a door release
system.
The controls on your IP Deskphone allow you to close the relay switch the
to activate the device; in this case, the device remains active until you
open the relay switch to turn it off. Alternately, you can use relay pulse to
activate the device for a 5 seconds.
To close the switch and activate a relay connection:
BtnQy
2. Press the BtnQy soft key.
The Button Inquiry screen displays
for 3 seconds and prompts you to press
a button.
3. Press the programmable key that you
want to query.
The screen displays text to indicate the
name of the assigned feature for 3
seconds and prompts you to press a
button for another query.
Exit
4. When you are finished querying
programmable buttons, press the Exit
soft key.
Feature
1. Press the Feature soft key.
To Next Page
Loading...
