Getting Started
49
• “Wall-mounting the IP Deskphone (optional)” on page 54
Figure 8: Wall-mount lever
Removing the stand cover
To access the cable routing tracks and attach cables, you must remove
the stand cover. Pull upward on the center catch as indicated in the
following figure, and remove the stand cover. The cable routing tracks are
now accessible.
WARNING Your Avaya 1140E IP Deskphone is shipped with
the base locked in position. To prevent damage to your
IP
Deskphone
, press the wall-mount lever, located under the
Handsfree key as indicated in the previous figure, to release
the base and pull it away from the IP Deskphone.
To Next Page
Loading...
