Avaya 1140E - Accessing the IP Deskphone; Logging on for the First Time; Automatic Login

Accessing the IP Deskphone
64
Accessing the IP Deskphone
You require a log on ID and a password to log on to a server with your IP
Deskphone.
Logging on for the first time
Whenever you log on to your IP Deskphone you must do the following:
• confirm your logon ID
• enter your password
• select the duration of this session
If you system administrator has configured your Deskphone with your
user logon and password, you can use the deskphone without further
configuration. For more information, see “Automatic login” on page 64.
The first time you use your IP Deskphone, you need to complete some of
the following procedures:
• “Configuring the domain” on page 65
• “Selecting a language” on page 67
• “Logging on to your Avaya 1140E IP Deskphone” on page 68
• “Configuring the duration of the login” on page 72
• “Selecting a location” on page 74
• “User Profile” on page 75
Note: The system automatically logs you back on after a power
outage or firmware upgrade. The system administrator configures this
feature on a network-wide basis.
Automatic login
Before you first receive your IP Deskphone, your system administrator
can configure your IP Deskphone with your user logon and password. If
this is the case, after you plug in the IP Deskphone you can use it without
further configuration.