Figure 39: Feature key details
The Program Key screen displays the following:
• Key—programmed feature key number
• Label—label used for the feature key
• Service—services programmed to the feature key, such as:
- Speed Dial
- Call Forward
- Do Not Disturb
- Send IM
- Presence
• User—current user to whom the programmed feature key is associated
• Address—SIP address for the feature key when programmed for Speed Dial, Call Forward, and
Send IM.
Note:
If you to try to view a feature key that is not programmed, the IP Deskphone displays the
message:
Program Key Not Available (Key is empty).
To edit a feature key:
To select a feature key to edit, do one of the following:
• Press the Up/Down navigation key to scroll through the feature
keys to highlight the one you want to edit and then press the Edit
context-sensitive soft key.
• Press the Feature key that you want to edit and then press the
Edit context-sensitive soft key.
• Use the dialpad to select the Feature key that you want to view
and then press the Edit context-sensitive soft key.
Table continues…
Additional features
August 2017 Avaya 1140E IP Deskphone with SIP Software User Guide 170
Comments on this document? infodev@avaya.com
To Next Page
Loading...
