6. Choose one of the following:
• Press the Finish context-sensitive soft key to select the Presence
detail and finish the procedure.
• Press the Back context-sensitive soft key to return to the previous
step.
Remove a programmed feature key
You can remove a feature key by using one of the following methods:
• Edit context-sensitive soft keys. See
To remove a feature key using the Edit context-sensitive
soft key: on page 179
• Bulk context-sensitive soft keys. See Remove programmed feature keys by using the Bulk
context-sensitive soft key: on page 181.
To remove a feature key using the Edit context-sensitive soft key:
1. Press the Prefs soft key, select Feature Options,
and select Feature Keys from the menu.
The Program Key screen opens as shown in
Feature keys on page 167.
2. To select a feature key to remove, do one of the
following:
• Press the Up/Down navigation key to scroll
through the feature keys to highlight one to remove
and press the Edit context-sensitive soft key.
• Press the feature key that you want to remove and
then press the Edit context-sensitive soft key.
• Use the dialpad to select the Feature key that you
want to view and then press the Edit context-
sensitive soft key.
The Program Key screen opens as shown in Figure
40: Edit feature key screen on page 171
Table continues…
Feature keys
August 2017 Avaya 1140E IP Deskphone with SIP Software User Guide 179
Comments on this document? infodev@avaya.com
To Next Page
Loading...
