Customizable banner for login
If a login banner with login banner text is configured, the IP Deskphone displays the banner text on
the screen as the user logs on.
Changing the IP Deskphone configured language does not change the banner text language. The
banner appears only for the primary user of an IP Deskphone. In a multiuser configuration, even
when the banner text is enabled, the banner does not appear to the secondary user logins.
The following figure shows an example of the login banner screen
Figure 53: Login banner screen
You dismiss the banner screen by pressing OK. Until you dismiss the banner screen, the IP
Deskphone switches to DND mode until the banner is dismissed. Outgoing or incoming calls are not
allowed other than emergency calls until you dismiss the banner.
You can see pop-up messages or prompts on the bottom of the banner screen after you dismiss the
login banner.
Related links
Advanced features on page 219
Phone Information - Details screen
The Phone Information — Details screen displays the Primary user, Primary domain, MAC
address, and IP address of the IP Deskphone. The contents of this screen include user and IP
Deskphone identifiable information that may need to be protected (per US Federal/DoD
requirements/guidelines).
Note:
To hide information that is protected, the administrator can disable the Details context-sensitive
soft key on the main Phone Information screen.
If the Details context-sensitive soft key is disabled, you cannot view details on the Phone
Information - Details screen.
Advanced features
August 2017 Avaya 1140E IP Deskphone with SIP Software User Guide 230
Comments on this document? infodev@avaya.com
To Next Page
Loading...
